PARASOUND HALO HINT 6 INTEGRATED AMPLIFIER WITH DAC BLACK

5.574,09€ /KOM
(41.997,96Kn)
Bez PDV-a: 4.459,27€
(33.598,37Kn)
Dostupnost na upit
Proizvođač:
Šifra proizvoda:
P-HINT6

Trenutno pregledava 1 posjetitelj!

OPIS

Nova, poboljšana inačica Halo Integrated-a.Parasoundov novi HINT 6 je poboljšana verzija hvaljenog Halo integriranog pojačala.
Nevjerojatna kvaliteta zvuka i muzikalnost izvornog Halo Integrated (HINT) se nastavlja u HINT 6. Novi model ima Burr-Brown kontrolu glasnoće s lako čitljivim prednjim zaslonom. Dodan je i nadograđeni USB prijemnik s plug-and-play funkcijom za Windows i Mac, drugi optički ulaz, pojačano pojačanje fonova, veće odvajanje kanala i oku ugodna poboljšanja u izgledu.
Specifikacija(engl):
Power Output - Both channels driven (0.05% THD, RMS, 20Hz - 20kHz): 160 watts x 2 @ 8 ohms; 240 watts x 2 @ 4 ohms.
Power Output - Both channels driven (0.9% THD, RMS, 20Hz - 20kHz): 180 watts x 2 @ 8 ohms; 270 watts x 2 @ 4 ohms.
Current Capacity: 45 amps peak per channel.
Frequency Response: 10Hz - 100kHz, +0/-3dB; 20hz-20kHz, +0/-0.5 dB.
Total Harmonic Distortion (THD): 0.01 %, average listening levels; < 0.05 %, 160 watts x 2 @ 8 ohms.
Interchannel Crosstalk: > 70dB at 20kHz; > 78dB at 1kHz.
Signal to Noise Ratio - IHF A-weighted: Line in: - 103dB (input shorted); Digital in: - 106dB.
Amplifier Damping Factor: 800 at 20Hz.
Preamp Stage Input Sensitivity: 300mV in for 1V at Pre Out jacks; Total Preamp Stage Gain: 10dB; Max Output Unbalanced: 7 V; Max Output Balanced: 9 V.
Power Amplifier Stage Sensitivity: 1V at Bypass/Amp In for 28 V at Speaker Out; Total Amp Stage Gain: 28dB.
Phono Stage Sensitivity / Input Impedance: MM 41dB / 47kohms; MC 54dB / 47kohms or 100 ohms.
High and Low Pass Crossover Slopes: 12dB per octave.
Supported DAC Sampling Rates: USB: up to 384kHz / 32-bit PCM; DSD Native: DSD64, DSD128, DSD256; DSD over PCM (DoP) at 384kHz; Coax/Optical: up to 192 kHz / 24-bit PCM;.
Digital to Analog Converter: ESS Sabre32 Reference ES9018K2M; 384kHz / 32-bit.
USB 2.0 Controller: Savitech SA9227, 384kHz / 32-bit.
Headphone Amplifier: Texas Instruments TPA6120A; Output Impedance: 10 ohms.
Input Impedance: Unbalanced: 24kohms: Balanced: 100kohms per leg.
Preamplifier Output Impedance: Unbalanced: 100 ohms; Balanced: 470 ohms per leg.
Power Requirements: Standby: 0.5 watts; Idling power: 70 watts; Maximum: 750 watts; 110-125 VAC 60Hz or 220-250 VAC 50Hz; AC mains voltage is set on rear panel.